Two-component high temperature curing liquid conductive silicone rubber BH-E6732/6733

product description

BH-E6732/6733 is a two-component, high-temperature curing conductive silicone. It can be applied to the FIP site molding process and used for dispensing by precision dispensers to form various shapes of conductive gaskets with excellent shielding performance, suitable for triangles Dispensing process, the cured rubber strip has the characteristics of low hardness, excellent compression performance, good resilience and low compression permanent deformation. Especially on the surface of aluminum castings and magnesium alloy castings, it has excellent electromagnetic shielding and good resistance. Electrolytic corrosive, suitable for long-term use in harsh outdoor environments, and the operating temperature range is between -55°C and 125°C.

constitute

Ÿ Silicone rubber

Ÿ Nickel-plated graphite powder

Product Features

Ÿ Low viscosity, excellent on-site mixing and dispensing performance

Ÿ High conductivity (volume resistivity 0.010-0.025Ω·cm), average shielding effectiveness> 110 dB

Ÿ Low hardness (Shore A 45-63), excellent compression set performance

Ÿ Good adhesion, able to stick firmly on the metal surface

Ÿ Applicable to the dispensing process of different shapes, which can better compensate the tolerance of the device and save the material cost

Application field

Ÿ Communication base station

Ÿ Smart electronic products such as mobile phones

Ÿ Computer hardware

Ÿ Wireless communication equipment

Ÿ National Defense

Performance

Packaging and ordering information

For example, BH-E6732-00-3000, 45A hardness liquid conductive adhesive is packaged in a plastic tube, one set contains 1.5KG of component A and 1.5KG of component B.

If you have other special packaging requirements, please contact Beijing Beihua New Rubber Special Material Technology Co., Ltd.